VERTIGO
TITANIUM R 250/300
ХАРАКТЕРИСТИКА
TITANIUM R 250/300
| ENGINE | 2 stroke engine | |
| ENGINE SIZE | 247cc EFI | 300cc EFI |
| Ø x STROKE | 72.5x60mm | 79x60mm |
| CRANKCASE | Aluminium | |
| GEARBOX | 6 speed gearbox, 4 gears trial developed | |
| CLUTCH | Multi-disc oil wet adjustable preload | |
| TRANSMISSION | 10z/42 | |
| EXHAUST MUFFLER | Symmetric and centered silencer | |
| MANIFOLD | Titanium Vertigo Edition | |
| RADIATOR | Vertigo special design, adapted to frame shape | |
| FUEL INJECTION | Electronic Fuel Injection | |
| ENGINE SENSORS | Integrated injection driver | |
| Protocol CAN 2.0 B | ||
| Atmospheric pressure & Air temperature sensor | ||
| TPS (Throttle position sensor) | ||
| WATER PUMP | ECU controlled electronic water pump | |
| FRAME | Titanium GR5 + aluminium 6082 subframe | |
| SWINGARM | White Aluminium cast | |
| FRONT SUSPENSION | Tech Factory Gold 170mm stroke | |
| REAR SUSPENSION | Monoshock / swingarm, Vertigo design | |
| swingarm combined with multiregulation | ||
| REIGER monoshock with high/low speed | ||
| compression and rebound adjustement | ||
| 170mm stroke | ||
| AIRBOX | High capacity 1.1l airbox | |
| PETROL TANK | High capacity 2.3l, low and centered CG | |
| HANDLEBAR | Renthal Fatbar | |
| FRONT BRAKE | Braktec CNC mechanized monoblock caliper with 185mm disc | |
| FRONT CALIPER | 4 pistons | |
| FRONT RIM | Morad Gold 1.60 x 21″ | |
| REAR BRAKE | Hydraulic system with 150mm FIM disc | |
| REAR CALIPER | 2 pistons | |
| REAR RIM | Lightweight Morad Gold anodized 2.15×18″ | |
| TYRES | Dunlop D803GP | |
| TOTAL LENGHT | 2010mm | |
| DIST. BETWEEN AXLES | 1310mm | |
| SEAT HEIGHT | 680mm | |
| WEIGHT | 65 kg | |
